Filter
Top Products
6
Check accessoriesAbout the LAMP indicator
Change channel / page
Volume
Names of all the parts
Remote control
(RM-C1811H)
AA/R6 Batteries
For confi rming
the TV works
When watching TV
When operating a JVC VCR
or DVD
Change the aspect ratio (P. 12)
Turn on 3D sound (P. 12)
Take a snapshot of the
screen (P. 12)
View in multi-picture
mode (P. 15)
Hold the current page
(P. 13)
Bookmark pages
Reveal hidden pages
Enlarge the text
Switch briefl y
between teletext and TV
To index page
(P. 12)
Return to TV
Power On / Off
Change the channel / page
Watch video, etc.
(P. 14)
Select and
confi rm settings in menus
To the previous channel
To teletext
(P. 13)
Volume
Change the channel / page
Switch between VCR / TV / DVD
(P. 14)
(P. 14)
When watching TV / Video
Mute
When viewing teletext
Insert the batteries
Use two AA/R6 dry cell batteries.
Insert the batteries from the
end, making
sure the and polarities are correct.
Channel information
(P. 12)
To menu
(P. 17)
(P. 13)
When viewing teletext
Power On/Off
Power lamp
ON: Lit (Blue)
OFF: Unlit
To headphones
Display on-screen
menu / set
Switch between
TV / AV devices
(P. 10)
To change the brightness of the power lamp
“ILLUMINATION” (P. 17)
LAMP indicator
The LAMP indicator blinks as follows.
When turning on the TV, the LAMP indicator blinks for
about 1 minute every 2 seconds.
The lamp is warming up. During this period, the TV
cannot be turned off.
Cooling is performed. During the cooling period, the
TV cannot be operated.
Audio input terminals
(EXT-5)
S-video input terminal
(EXT-5)
After turning off the TV, the LAMP indicator blinks in
orange for about 90 seconds every 3 seconds.
Video input terminal
(EXT-5)
Front panel
Left side panel
“Lamp” (P. 20)
If the LAMP indicator blinks rapidly
When this indicator blinks
“About the LAMP indicator” (Below)
Connecting terminals on the back of the TV “Connecting External devices” (P. 10)