Filter
Top Products
82 EN
SPECIAL FEATURES
TV Multi-Brand Remote
Control
The recorder´s remote control can control several functions on
JVC remote control TVs and on the brands of remote control
TVs listed below.
TURN ON THE TV
1
Turn the power on using the TV´s remote control.
SET REMOTE CONTROL
MODE
2
Press and hold TV on the remote control when “TV”
appears until the two digits start blinking on the display
window of the recorder´s remote control.
SET TV BRAND CODE
3
Enter your TV’s brand code using the NUMBER keys,
then press OK.
Follow the example shown at bottom left.
● Once you have set the remote control to operate the
TV, you don’t have to repeat this step until you
replace your remote control’s batteries.
● PANASONIC has two codes. If the TV does not
function with one code, try entering the other.
OPERATE TV
4
First, press POWER on the remote to see if the TV’s power
goes off as it should. If it does, try other operations.
● The POWER, TV/VCR, TV CH
+/–
, TV VOL +/–,
A. MONITOR (TV Muting) and NUMBER keys on the
remote can all be used to operate the TV. *For some
brands of TV, you must press ENTER after having
pressed the NUMBER keys.
● To return the remote to the recorder control, press
HDD or VHS (or S-VHS).
TV BRAND NAME BRAND CODE
JVC 01
MAGNAVOX 02
MITSUBISHI 03
PANASONIC 04, 11
RCA 05
SHARP 06
SONY 07
TOSHIBA 08
ZENITH 09
HITACHI 10
SAMSUNG 12
SANYO 13
SEARS 13
NOTE:
Depending on the type of TV, there may be cases where some
or all functions cannot be operated using the remote control.
123
4 56
789
0
2
1
4
3
>
<
1
2
–
+
POWER
NUMBER
TV
A.MONITOR
OK
TV/VCR
ENTER/OK
TV CH +
TV VOL +
TV VOL –
VHS
HDD
TV CH –
TV – 01