EN 83
Cable Box Multi-Brand
Remote Control
The recorder’s remote control can control functions on the
brands of cable boxes listed below. Some cable box brands
have more than one code. If your cable box does not function
with a specified code, try other codes.
TURN ON THE CABLE BOX
1
Turn the power on using the cable box´s remote
control.
SET REMOTE CONTROL
MODE
2
Press and hold TV on the remote control when “CABLE
DBS” appears until the two digits start blinking on the
display window of the recorder´s remote control.
ENTER CABLE BOX BRAND
3
Enter your cable box brand code using the NUMBER
keys, then press OK.
Follow the example shown at bottom left.
● Once you have set the remote control to operate the
cable box, you don´t have to repeat this step until
you replace the remote control´s batteries.
OPERATE CABLE BOX
4
First, press POWER to see if the cable box’s power goes off
as it should. If it does, try other functions (TV CH
+/–
and
the NUMBER keys can be used to operate the cable box).
● For some brands of cable box, you must press ENTER
after having pressed the NUMBER keys.
● To return the remote to the recorder control, press
HDD or VHS (or S-VHS).
CABLE BOX BRAND NAME BRAND CODE
ARCHER 01, 05, 17
CABLETENNA 01, 17
CABLEVIEW 15, 16, 17, 21, 25
CITIZEN 15, 16, 17, 21, 25
CURTIS 02, 08
DIAMOND 01, 17
EASTERN 19
GC BRAND 15, 16, 17, 21, 25
GEMINI 15
GENERAL INSTRUMENTS 01, 04, 06, 11, 12, 15
HAMLIN 10, 18, 19, 23
JASCO 15
JERROLD 01, 04, 06, 11, 12, 15
NOVAVISION 02, 08
OAK 07, 20
PANASONIC 13, 14
PULSER 15, 16, 17, 21, 25
RCA 13, 14
REGAL 10, 18, 19, 23
REGENCY 19
REMBRANDT 01, 16, 17
SAMSUNG 05, 16, 24
SCIENTIFIC ATLANTA 02, 08
SIGMA 07, 20
SL MARX 05, 16, 17, 24, 25
SPRUCER 13, 14
STARGATE 05, 15, 16, 17, 21, 24, 25
TELEVIEW 05, 16, 24
TOCOM 01, 04, 16
UNIKA 01, 17
UNIVERSAL 16, 17, 25
VIDEOWAY 03, 09, 22
ZENITH 03, 09, 22
NOTES:
●
You must set the cable box brand for your remote control and
the cable box brand for your Controller (
੬
pg. 16) separately.
The list of cable box brands that can be controlled by your
remote control is different from the list of brands that can be
controlled by your controller.
●
Depending on the type of cable box, there may be cases
where some or all functions cannot be operated using the
remote control.
●
It's not possible to set the remote control for both your cable
box and a DBS receiver at the same time. You can only set the
remote control to operate one of these units at a time.
123
4 56
789
0
2
1
4
3
>
<
1
2
–
+
POWER
NUMBER
VHS
TV
OK
TV/VCR
ENTER/OK
TV CH +
HDD
TV CH –
dbSCBL – 01