Filter
Top Products
basic features30
– P1 –
[x]: DELETE [+/–] a k
[PROG]: EXIT
START STOP
SP VPS/PDC OFF
DATE TV PROG
24.12 3
ITV
8:00
10:00
[1] a k
[PROG]: EXIT
1
2
3
4
5
6
7
8
START
8:00
10:00
11:30
9:00
STOP
10:00
10:45
13:00
10:00
CH
3
2
1
92
DATE
24.12
25.12
25.12
DAILY
When Programmes Overlap Each Other
If PROGRAM OVERLAPPED appears, you have another programme overlapping the
programme you have just made.
confirm overlapping programmes The
Program Check screen appears and conflicting
programmes will start blinking.
Example: Programme 1 (you have just made) and
Programme 4 overlap each other.
select programme to modify Press the A
and B buttons, then press
O (or E). You
can only select one of the overlapping programmes.
note If you do not mind this overlap, press PROG to finish the timer
programme setting. The programme with the lower programme number will be
recorded and the other one will not be recorded correctly. Without doing
anything for about 1 minutes, the VCR will finish the timer programming.
cancel a programme Press x to cancel a
programme when the Program screen you do not
want is shown.
change a programme Use the START +/–,
STOP+/–, DATE +/–, PR +/–, / and PDC
buttons as necessary, then press O.
PROGRAM COMPLETED appears on the screen for
about 5seconds, then normal screen appears.
note If the overlap is not yet solved or another overlap occurs with the timer
programme setting made last after making correction on a programme, the
conflicting programmes will be shown on the Program Check screen again.
Repeat the above steps again until the overlap is solved.