Filter
Top Products
advanced features48
Auto Satellite Programme
Recording
Auto Record from Satellite Receiver
This facility allows a programme timer-recorded using the satellite receiver to be recorded on the
VCR.
connect up Connect your satellite receiver, TV and VCR (see diagram below).
DECODER VCR TV
EXT.2 EXT.1
Outdoor
Unit
Satellite Cable
TV Aerial
TV Aerial
Cable
ANT. IN
RF OUT
Mains Outlet
21-pin AV Input
Connectors
(SCART)
Aerial
Connector
Satellite Receiver
Back of VCR
Back of TV
IMPORTANT
When you set
L-2 SELECT to SAT (੬ pg. 51), it is possible to view a satellite broadcast with the TV
set to its AV mode even if the VCR is turned off. When the VCR is in Stop mode or recording,
press
TV/VCR on the Remote Control to turn off the VCR indicator on the display panel.
• If you turn on the VCR when the satellite receiver’s power is off, nothing appears on the TV
screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press
TV/VCR on the Remote Control to set the VCR to the video mode.
NOTE:
Refer to the instructions supplied with your satellite receiver.