JVC HR-S6857EK VCR User Manual


 
advanced features 57
Auto Timer
When the AUTO TIMER is set to ON, the timer is automatically engaged when the VCR power is
turned off and automatically disengaged when the VCR is powered back on.
get to the mode set screen Press m. Move the highlight
bar to
MODE SET using the A and B buttons and press
O(or E).
enable/disable auto timer Move the highlight bar to AUTO
TIMER
using the A and B buttons. Press O (or E)
to select
ON or OFF.
return to normal screen Press m.
Repeat Playback
start repeat playback Press ., then press and hold . again for over 5 seconds, then release.
The Play indicator (
) will flash slowly on the display panel and the VCR will automatically
playback and rewind the tape 100 times and then stop.
stop playback Pressing S (or ., <, >, | ) stops repeat playback.
Next Function Memory
play To playback immediately after rewinding, press < and then . within 2seconds.
power off To power off the VCR immediately after rewinding, press < and then o
within 2seconds.
timer standby To put the VCR in timer standby mode immediately after rewinding, press
< and then c within 2seconds.
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER ON
O.S.D. ON
PROG. NAVIGATION ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
NEXT PAGE
F