Filter
Top Products
15
Manual Tracking
Once playback begins, the VCR’s automatic tracking function is
engaged. If noise appears in the picture, you can override this
and make the adjustment manually.
ENGAGE MANUAL
TRACKING MODE
1
During playback, press the CH5 and
∞
buttons on the
VCR's front panel simultaneously to cancel the
automatic tracking mode and enable manual tracking
adjust.
ADJUST MANUAL
TRACKING
2
Press CH5 or
∞
on the VCR's front panel or remote.
Press briefly for fine adjust, or press and hold for coarse
adjust. Watch the screen and continue adjusting until
optimum picture and sound quality are achieved.
RE-ENGAGE AUTOMATIC
TRACKING
3
Press the CH5 and
∞
buttons on the VCR's front panel
simultaneously.
● When automatic tracking is re-engaged, Auto Picture
is automatically activated.
NOTES:
●
To obtain a noiseless still picture it may be necessary to adjust
tracking in slow playback and then engage Pause.
●
Manual tracking is possible during hands-free slow-motion.
During hands-free slow-motion playback, simply press
CH5
or
∞
on the VCR's front panel or remote to adjust tracking.
3
¶7
8
1¡
1
2
3
4
5
6
7
8
0
9
q
2
3
6
5
/
8
CH
Index Search
Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
START SEARCH
1
While the tape is stopped, press SEARCH T or Y.
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
SEARCH T or Y repeatedly until the correct
number is displayed on screen (only if SUPERIMPOSE
is set to ON (੬ pg. 17). Playback begins automatically
when the desired recording is located.
● If necessary press REW or FF when play starts to
search visually to find the very beginning of the
desired program.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
CH
FF
REW
FF
REW
SEARCH