Filter
Top Products
36
INDEX (cont.)
REMOTE CONTROL
1 TV Button (See below)
2 TV/VCR Button (੬ pg. 22)
3 CANCEL Button (੬ pg. 26)
Channel [CH] SKIP Button (੬ pg. 11)
Counter [C.] RESET Button (੬ pg. 19)
4 TIMER Button (੬ pg. 25)
5 ADD Button (੬ pg. 11)
6 TV Volume [VOL] +/– Button (See below)
7 Recording Speed [SP/EP] Button (੬ pg. 13)
8 Rewind [REW] Button (੬ pg. 12)
9 PLAY Button (੬ pg. 12)
0 Record [REC] Button (੬ pg. 13)
! STOP Button (੬ pg. 12)
@ DISPLAY Button (No Function)
# SEARCH Button (੬ pg. 14)
$ POWER On/Off Button (੬ pg. 7)
% NUMBER Buttons (੬ pg. 13)
^ DAILY Timer Recording Button (੬ pg. 24)
& WEEKLY Timer Recording Button (੬ pg. 24)
* "AUX" Mode Select Button (੬ pg. 30)
( ENTER Button (੬ pg. 13)
On-Screen Display [OSD] Button (੬ pg. 17)
) MENU Button (੬ pg. 7)
q Channel [CH] 5∞ Button (੬ pg. 13)
w OK Button (੬ pg. 7)
e Fast-Foward [FF] Button (੬ pg. 12)
r PAUSE Button (੬ pg. 14)
t SKIP SEARCH Button (੬ pg. 19)
TV
TV operation – Press and hold TV button,
then press POWER, CH 5/∞, TV/ VCR
OSD
TV
VOL
3
PLAY
¶
REC
7
STOP
8
PAUSE
1
••REW FF••
¡
POWER
TV/VCR
TIMER
ADD
MENU
OK
CH
SP/EP
DISPLAY
SKIP SEARCH
SEARCH
CANCEL ENTER
C.RESET/CH SKIP
1
2
3
4
5
6
7
8
DAILY
0 AUX
9
WEEKLY
w
e
1
2
4
5
3
8
6
7
0
9
!
@
#
$
r
t
(
q
%
&
^
*
)
Installing Batteries
1 Open the battery compartment cover.
2 Insert 2 "AA"-size batteries (provided) in the direction
indicated under the battery cover.
3 Replace the cover.
How To Use
The remote control can operate most of your VCR's functions,
as well as basic functions of JVC TV sets (see below).
1 Point the remote control toward the sensor window.
2 Press the appropriate operation button.
3 The maximum operating distance of the remote control
is about 8 m.
Operating JVC TVs
To operate your TV, while holding down TV, press the
corresponding button: POWER, TV/VCR, CH
5
∞. TV VOL
+/– can be used without holding down TV.
NOTES:
●
Depending on the type of JVC TV, there may be cases
where some or all functions cannot be operated using the
remote control.
●
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
Buttons shown in white on the illustration above can be
used to operate JVC TVs.