Filter
Top Products
EN 25
PLAYBACK AND RECORDING FEATURES
q
Playback
Features
Still Picture/Frame-By-
Frame Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the CH
5
or
∞
button to correct the picture.
● During still picture, the normal (mono) sound from
the previous 3 seconds (approx.) will be played back
repeatedly (provided there was at least 6 seconds of
normal playback prior to engaging the still picture
mode).
● "TIMESCAN AUDIO" must be set to "ON", or the
sound will not be heard (੬ pg. 38).
ACTIVATE FRAME-BY-
FRAME PLAYBACK
2
Turn the JOG dial to the right for forward frame-by-
frame playback, or to the left for reverse frame-by-frame
playback.
OR
Press PAUSE repeatedly to advance one frame at a time.
OR
Press TIME SCAN £ repeatedly for forward frame-by-
frame playback or TIME SCAN ™ repeatedly for
reverse frame-by-frame playback.
To resume normal playback, press PLAY.
12
45
3
6
8
0
7
9
CH
PLAY
REW
FF
PAUSE
TIME SCAN ™/£
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback resumes.
Slow Motion/
Reverse Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1
For hands-free slow-motion, turn the TIME SCAN
SHUTTLE ring one or two positions to the left or press
TIME SCAN ™ during playback to decrease speed in
the forward direction. Continue to turn the TIME SCAN
SHUTTLE ring to the left or press TIME SCAN ™ to
select the two reverse slow motion, reverse play and
reverse search modes.
OR
During still picture, turn the TIME SCAN SHUTTLE ring
one or two positions to the right for forward slow
motion, or to the left for reverse slow motion.
OR
During still picture, press and hold TIME SCAN £ for
forward slow motion, or press and hold TIME SCAN ™
for reverse slow motion. Release to return to still picture.
To resume normal playback, press PLAY.
Refer to the chart on Pg.37 for the Play, Slow Motion and
Search speeds that are selected using the TIME SCAN
SHUTTLE ring or TIME SCAN remote control buttons.
CH
PLAY
TIME SCAN SHUTTLE
PAUSE
JOG
ACTIVATE HIGH-SPEED SEARCH
1
During playback or still, press FF for forward high-speed
search, or REW for reverse high-speed search.
● The search speed is 7 times normal playback speed with
SP recordings, and 21 times normal with EP recordings.
● TimeScan will be automatically engaged during high-
speed search with an SP-recorded tape.
● If the tape speed changes from SP to EP during high-
speed search the TimeScan mode will change to EP
search mode.
● Press TIME SCAN for the opposite direction or turn
the TIME SCAN SHUTTLE ring to the opposite
direction during high-speed search of an EP-recorded
tape to change to 7x TimeScan search. (੬ pg. 36)
To resume normal playback, press PLAY.
High-Speed Search