Filter
Top Products
22 EN
The SHOWVIEW timer programming system eliminates the need
to input channel, date, start and stop time data when setting the
timer record function. Simply key in the SHOWVIEW number for
the TV program you wish to record (found in most TV listings)
and the recorder’s timer is automatically programmed.
You have to set "Guide Prog." numbers, which are assigned to each
station for purposes of S
HOWVIEW timer programming, for all the
stations stored in your recorder's memory to get proper results.
Before SHOWVIEW setup you must have performed the following
procedures:
● Tuner setting (੬ pg. 4, 39)
● Clock setting (੬ pg. 8)
SHOWVIEW
Setup
TIMER RECORDING
IMPORTANT
Perform the following procedure after Auto Set Up on page 4
and/or the channel setting steps on pages 39 – 42.
After setting the Guide Program Numbers, channel positions
may be incorrect if you stored or skipped channels. In this case,
re-perform Guide Program Number setting.
12
45
3
6
8
0
7
9
2
4
1
3
5
/
8
¡
1
8
q
6
ATTENTION
For a list of Guide Prog. Numbers for Poland, Czech
Republic, Hungary, and Russia, refer to page 46 of the
instruction manual printed in the corresponding language.
MENU
Guide Program Number Set
MAKE LIST OF STORED
STATION NAMES AND
CHANNEL POSITIONS
1
(Ex.)
TURN ON THE RECORDER
2
Press .
ACCESS MAIN MENU
SCREEN
3
Press MENU twice.
A Channel position B Station name
1ORT
2RTR