Filter
Top Products
EN 27
12
45
3
6
8
0
7
9
2
4
1
3
ENTER CHANNEL POSITION
6
Press TV PROG +/–.
IMPORTANT
Be sure to confirm the setting of VPS recording.
●If " ON" is displayed on the screen or " " is lit
on the display panel, VPS is set to ON.
●If " OFF" is displayed on the screen or " " is
not lit on the display panel, VPS is set to OFF.
To change the setting, press : VPS (NUMBER key
"7").
੬ "VPS Recording" on page 29.
SET TAPE SPEED
7
Press (SP/LP) to set the tape speed.
RETURN TO NORMAL
SCREEN
8
After confirming all information is correct, press OK
and the normal screen appears.
● Repeat steps 1–8 for each additional programme.
ENGAGE RECORDER’S
TIMER MODE
9
Press TIMER. The recorder turns off automatically.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER
key “9”) for weekly serials or DAILY (NUMBER key “8”) for
daily serials (Monday–Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
SP
– P1 –
START STOP
21:00 = 22:00
SP ON
DATE TV PROG
25.12 1
[+/–] =
[MENU] : EXIT
DAILY
WEEKLY
TIMER
OK
TV PROG+/–
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (
੬
pg. 28).
:VPS