Filter
Top Products
37
¶
1
4¢
7
3
8
¡
123
456
7
/
8
0
9
4
2
1
3
VIEW CONFIRMATION
SCREEN
4
The stations your recorder
located appear on a
Confirmation screen —
preset positions (PR),
channels (CH) and station
names (ID – ੬ pg. 42). To
view the next page of the
listing, press PUSH JOG
%fi . The blueback
screen and the program
currently being broadcast by the blinking station appear
alternately for 5 seconds each.
● The Guide Program numbers will also be set
automatically during Auto channel Set.
RETURN TO NORMAL
SCREEN
5
Press MENU.
● Using the Confirmation screen, you can skip or add
preset positions, enter station names and perform
other operations. Refer to pages 38 – 41 for the
procedures.
● Depending on reception conditions, the stations may
not be stored in order, and the station names may not
be stored correctly.
5
5
PR CH ID PR CH ID
01 26 BBC1 08 ––––
02 33 BBC2 09 ––––
03 23 ITV 10 ––––
04 30 CH4 11 ––––
05 37 CH5 12 ––––
06 –––– 13 ––––
07 –––– 14 ––––
[
5
∞
]
=
: EDIT
= [CANCEL] : DELETE
[MENU] : EXIT
5
5
%
%
PUSH JOG
MENU
IMPORTANT
● Depending on the reception conditions, the station names
may not be stored correctly, and auto Guide Program
Number Set may not work properly. If the Guide Program
numbers are not set properly, Video Plus+ timer recording
(੬ pg. 22) will not work correctly; be sure to check if the
Guide Program numbers have been set correctly
(੬ pg.10, "Video Plus+ Setup").
● Since your video recorder memorizes all detected
stations even if the reception condition is poor, some of
those stored stations may produce a noisy picture. To
delete those stations, ੬ "Delete A Channel" on page 39.
NOTE:
Fine tuning is performed automatically during Auto Channel
Set. If you want to perform it manually, refer to page 41.