Filter
Top Products
34
∞ 5
6
q
12
45
3
6
8
0
7
9
Edit From A
Camcorder
You can use a camcorder as the player and your VCR as the
recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder’s VIDEO
OUT and AUDIO OUT connectors and your VCR’s
VIDEO IN and AUDIO IN connectors.
● When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
● When using a Hi-Fi camcorder, connect its AUDIO
OUT L connector to the AUDIO IN connector on
your VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER’S INPUT
MODE
3
Press NUMBER key “0” to set to AUX.
START PLAYER
4
Set the camcorder to its play mode.
START RECORDER
5
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
EDITING
Recorder
To rear panel PAUSE/SPECIAL
FUNCTION connector
Mini-plug cable (not supplied)
(JVC camcorder only)
Your VCR
VIDEO
IN
AUDIO
IN
VIDEO OUT
AUDIO OUT
EDIT
Camcorder
Player
NUMBER "0"