Filter
Top Products
36
PAUSE/
SPECIAL
FUNCTION
REMOTE
PAUSE
∞ 5
6
q
∞ 5
6
q
0
This function makes it easier to create edited videos when your
VCR is used as the source player in combination with another
VCR equipped with a Remote PAUSE Connector. You can pre-
program up to 8 scenes or “cuts” for automatic editing in the
sequence you have specified.
Random As-
semble Editing
Player
Audio signal Video signal
MAKE CONNECTIONS
1
Connect your VCR’s VIDEO OUT and AUDIO OUT
connectors to the VIDEO IN and AUDIO IN connectors
on the recording deck, and connect your VCR’s PAUSE/
SPECIAL FUNCTION connector to the PAUSE connec-
tor on the recording deck.
● If the recording deck doesn’t have a PAUSE connec-
tor, connect to the R.A. EDIT connector instead.
● The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
PREPARE FOR EDITING
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LOAD SOURCE CASSETTE
3
Insert the source cassette into your VCR.
START SOURCE PLAYBACK
4
Press PLAY.
ACCESS MAIN MENU
SCREEN
5
Press MENU to bring up the Main Menu screen.
ACCESS R.A. EDIT SCREEN
6
Place the arrow next to
“R.A. EDIT” by pressing
CH
5
∞ or PUSH JOG
5
∞,
then press OK.
● The screen is superim-
posed on the video
playback in step 7.
Your VCR
MAIN MENU
PROGRAM SET
FUNCTION SET
TUNER SET
INITIAL SET
B.E.S.T.PICTURE SYSTEM
=R.A. EDIT
PRESS (
5
,∞), THEN (OK)
PRESS (MENU) TO END
EDITING (cont.)
Another VCR
(w/PAUSE conector)
Recorder
Mini-plug Cable
(Not supplied)
MENU
OK
CH
PLAY
STOP
CANCEL
C.MEMORY
PLAY
OK
STOP
MENU
PUSH JOG
C.MEMORY