Filter
Top Products
EN 31
ENTREE
ANT. IN
ENTREE/DECODEUR
IN/DECODER
AV2
ENTREE/SORTIE
IN/OUT
SORTIE
RF OUT
ANTENNE
AV1
ENTREE
ANT. IN
ENTREE/DECODEUR
IN/DECODER
AV2
ENTREE/SORTIE
IN/OUT
SORTIE
RF OUT
ANTENNE
AV1
Another recorder
RF Cable
(provided)
Another recorder
Recorder
21-pin SCART Cable
(not provided)
Player Your recorder Recorder Your recorderTV Receiver
TV Receiver
RF Cable
(provided)
21-pin SCART Cable
(not provided)
Player
VIDEO
CHAN-
NEL or
AV mode
VIDEO
CHANNEL
or AV
mode
AV2 SELECT Setting
1 Press MENU to access the Main Menu screen.
2 Press %fi to move the highlight bar (pointer) to "MODE SET",
then press OK or
#
.
3 Press %fi to move the highlight bar (pointer) to "AV2 SELECT".
4 Press OK or
#
to select "AV2", "DECODER" or "SAT".
a–AV2 : To use this recorder as the recording deck with
the player connected to the AV2 IN/DECODER
connector, or to use the satellite tuner con-
nected to the AV2 IN/DECODER connector.
b–DECODER : To use a decoder connected to the
AV2 IN/DECODER connector.
c–SAT : To view a satellite programme with the TV set
while the recorder is in Timer mode, in Stop
mode, recording or turned off. (੬ pg. 32)
5 Press MENU to return to normal screen.
● If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back to "DECODER" after
editing.
● If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to "AV2".
● The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was
removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using
a decoder, be sure to set "AV2 SELECT" back to "DECODER".
MODE SET
PREVIOUS PAGE
AV2 SELECT AV2
COLOUR SYSTEM PAL/NTSC
[5∞] =
[MENU] : EXIT
HR-J468EU HR-J311/268EU
MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O. S. D. ON
DIRECT REC ON
POWER SAVE ON
AV2 SELECT AV2
NEXT PAGE
[5∞] =
[MENU] : EXIT