JVC HR-J468EU VCR User Manual


 
EN 43
NOTES:
Just Clock (when set to "ON") adjusts the recorder's built-in
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
Just Clock is not effective when . . .
the recorder’s power is on.
the recorder is in the Timer mode.
a difference of more than 3 minutes exists between the
built-in clock’s time and the actual time.
the recorder is in the Auto Satellite Prog Rec mode
(
pg. 28).
the recorder is in the Power Save mode (
pg. 10).
If Just Clock is set to "ON", the recorder’s clock is automati-
cally adjusted at the start/end of Summer Time.
Just Clock may not function properly depending on the
reception condition.
SET JUST CLOCK
6
The default setting is “OFF”. Set as desired by pressing
%fi, then press OK or
#
.
For the Just clock function, "Just Clock" on page
42.
If you set to “OFF”, you can disregard the next step as
you won’t be able to receive regular clock adjustments.
SET CLOCK DATA SOURCE
CHANNEL POSITION
7
The recorder is preset to receive clock setting and
adjustment data from channel position 1. Press %fi to set
the channel position to the number representing the
station transmitting clock setting data, then press OK or
#
.
START CLOCK OPERATION
8
Press MENU.
123
456
7
89
0
2
4
1
3
?
OK
MENU