Filter
Top Products
25
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1
Press DISPLAY until a counter reading appears on the
dispay panel.
RESET COUNTER
2
Press C. RESET before starting recording or playback.
● The counter is reset to “0:00:00” and shows the exact
elapsed time as the tape runs.
12
45
3
6
8
0
7
9
2
1
3
ADJUST AUDIO RECORDING
LEVEL
1
Turn Hi-Fi REC LEVEL in either direction.
● When the level indicator lights up to or near 0dB
with the loudest signal being applied, the recording
level is optimum.
NOTES:
●
Make sure that the "HI-FI L+R" position is selected with the
AUDIO MONITOR button.
੬
p. 16
●
Noise will increase if the recording level is too low, while
distortion will increase if the level is too high.
Hi-Fi REC LEVEL
AUDIO MONITOR
C.RESET
DISPLAY
Hi-Fi Audio Recording LEVEL
Control
In most cases, setting the Hi-Fi audio recording level control to
the center position will provide satisfactory results. If necessary,
you can adjust the Hi-Fi audio recording level more precisely
by reffering to the audio level indicator on the front panel.
RECORD
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
1
Press RECORD on the recorder.
ENGAGE ITR MODE
2
Press RECORD again. ITR blinks and 0:30 appears on
the front display panel.
SET RECORDING
DURATION
3
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.