Filter
Top Products
36
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
R.A. EDIT
REMOTE
PAUSE
8
••
•
•
••
••
•
•
•
••
•
•
••
••
•
•
•
0
1
3
This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or “cuts” for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder. ੬ pg. 37
Random As-
semble Editing
PLAY
STOP
EDITING (cont.)
MAKE CONNECTIONS
1
Connect your recorder’s AV1 IN/OUT connectors to the
VIDEO IN and AUDIO IN connectors on the recording
deck, and connect your recorder’s R.A. EDIT connector
to the PAUSE connector on the recording deck.
● If the recording deck doesn’t have a PAUSE connec-
tor, connect to the R.A. EDIT connector instead.
● The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
PREPARE FOR EDITING
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LOAD SOURCE CASSETTE
3
Insert the source cassette into your recorder.
START SOURCE PLAYBACK
4
Press PLAY.
ACCESS R.A. EDIT
FUNCTION
5
Press R.A. EDIT.
● The screen is superimposed on the video playback in
step 6.
LOCATE EDIT-IN POINT
6
Find the point on the source
tape from where you want
the edited scene to begin by
pressing PUSH JOG or
using the TIME SCAN
SHUTTLE ring or the JOG
dial, then press IN/OUT.
● The edit-in point is
registered in memory and appears on the screen.
● You can also perform an Index Search (if index marks
have been previously recorded on the tape at the
desired points) to find the points you want, but this
will result in reduced accuracy.
fi
%
Player Your recorder
Audio signal Video signal
Recorder
START
PUSH JOG
R.A. EDIT EDIT MODE
=1
2
3
4
5
6
7
8
TTL 0:00:00 CNT 0:00:00
IN/OUT
JOG
TIME SCAN SHUTTLE
PLAY
STOP
IN/OUT
START
R.A. EDIT
Another recorder
(w/PAUSE connector)
Mini-plug Cable
(Not provided)
CANCEL
R.A. EDIT