JVC HR-S5900U VCR User Manual


 
16 EN
INITIAL SETTINGS (cont.)
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
Access Main Menu screen on VCR
Press MENU.
Access Initial Set screen
Press SHUTTLE PLUS %fi to move the highlight
bar (arrow) to INITIAL SET, then press OK or
SHUTTLE PLUS
#
.
Access Cable Box Set screen
Press SHUTTLE PLUS
%fi to move the
highlight bar (arrow) to
CABLE BOX SET,
then press OK or
SHUTTLE PLUS
#
.
Select cable box output channel
Your selection depends
on how your cable box
is connected to your
VCR.
If your cable box is
connected to your
VCRs ANTENNA IN
terminal on the rear
Press SHUTTLE PLUS %fi on the Remote until
the channel number representing the cable
boxs output (CH2 CH9) appears on the
screen.
If your cable box is connected to your VCRs
AUDIO/VIDEO IN connectors on the front panel
Press SHUTTLE PLUS %fi on the Remote until
ON F-1 (FRONT) appears on the screen.
If your cable box is connected to your VCRs
AUDIO/VIDEO IN connectors on the rear panel
Press SHUTTLE PLUS %fi on the Remote until
ON L-1 (REAR) appears on the screen.
If you do not use a cable box
Press SHUTTLE PLUS %fi on the Remote until
OFF appears on the screen.
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
=
CABLE BOX SET
DBS RECEIVER SET
SELECT WITH (5,) AND (OK)
PRESS (MENU) TO END
CABLE BOX SET
OFF
PRESS (5,), THEN (OK)
PRESS (MENU) TO END
123
456
7
89
0
2
4
1
3
Setting cable box output
channel & brand
After installation, set the cable box outputs channel and
its brand correctly; otherwise, the Controller cannot
work correctly.
Turn on cable box
Select a channel other than channel 9 on your
cable box.