JVC HR-S5900U VCR User Manual


 
22 EN
Basic
Playback
Features
Changing display information
Press DISPLAY during playback.
Each time you press the button, the front display panel
shows the time counter, tape remaining time and the
clock time in sequence.
To display the VCR status including the tape remaining
time, the time counter and the clock time on the TV
screen, see Showing on-screen display ( pg. 27).
The approximate tape remaining time appears and the
"
" indicator lights on the front display panel.
The tape remaining time is calculated based on the
tape speed (SP or EP) being used. The indicated
remaining time is only an estimate.
To reset the time counter, press C. RESET on the
Remote. The counter reading becomes 0:00:00. It is
also reset when a tape is inserted.
Checking tape position
The tape position indicator
appears on screen in the
following cases:
When you change the VCR
operation mode from the
stop mode to fast forward or
rewind mode.
When you perform an Index
Search ( pg. 24) or Instant Review ( pg. 24).
The position of
in relation to B (Beginning) or E
(End) shows you where you are on the tape.
NOTES:
"SUPERIMPOSE" must be set to ON, or the indicator will
not appear (
pg. 39, 40).
It may take a few seconds for the tape position indicator to be
displayed.
Playing back tape repeatedly
Repeat Play
You can play back a tape repeatedly (100 times).
While playing back a tape, press and hold PLAY ( 3 )
for more than 5 seconds.
The play indicator ( # ) on the front display panel starts
flashing slowly, and a tape will be played back
100 times.
To stop playback, press STOP ( 7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
C
A
COUNT 0:33:27
BE
+++
B
Time Counter
Tape Remaining Time
Clock Time
BASIC PLAYBACK AND RECORDING (cont.)
VIDEO (MONO)LAUDIOR
S VIDEO
S-VHS ET
FF
REW
POWER
REC PAUSE STOP/EJECT
PLAY
+
CH /+
PUSH / TURN
24HR QUICK
PROGRAM
REC LINK
A.DUB
INSERT
STOP/EJECT
( 7 / 0 )
2
123
456
7
89
0
2
4
1
3
A
A
C
F
a, b, c
F
a
F
C
F
b
E
D
STOP ( 7 )
C. RESET
1
D