Filter
Top Products
advanced features36
[1] a k
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT VIDEO
L-2 INPUT VIDEO
L-2 INPUT Setting
The L-2 IN/DECODER connector accepts either a composite signal (regular video
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
L-2 INPUT to the appropriate mode depending on the output
signals of the connected unit.
get to the output/input set screen Press m. Move the highlight bar to
OUTPUT/INPUT SET using the A and B buttons and press
OK
3
/
(or E).
select mode Move the highlight bar to L-2 INPUT using the A and B
buttons. Press
O
K
3
/
(or E) to select the desired mode:
FOR L-2 INPUT
•
VIDEO : If a connected device’s output is
compatible only with regular
video signals, set to
VIDEO.
•
S-VIDEO : If a connected device’s output is
compatible with Y/C signals, set to
S-VIDEO. This setting will let you
take advantage of higher-quality
S-VHS pictures. (For connection,
be sure to use a 21-pin SCART
cable that is compatible with the
Y/C signal.)
return to normal screen Press m.
HR-S5955/5956EK-EN/p27-39 5/28/02, 11:51 AM36