JVC HR-S5955EK VCR User Manual


 
advanced features52
Guide Program Numbers
Guide Program Numbers are used by the VIDEO Plus+ system to identify the correct preset
to record. You should only need to perform this function if:
using a PlusCode number does not identify a preset number automatically
you add a channel after Auto Setup has been performed
you wish to use the VIDEO Plus+ system to record a satellite programme
Manually Setting Guide Program Numbers
get to the guide prog set screen Press m. Move the highlight bar to INITIAL SET using
the A and B buttons and press
O
K
3
/
(or E). Move the highlight bar to GUIDE PROG
SET
using the A and B buttons and press
OK
3
/
(or E).
enter guide prog number Use the A and B buttons to enter the correct Guide
Program number for the TV station shown then press
OK
3
/
(or E).
enter receiving preset number Use the A and B
buttons to enter the receiving preset number that the VCR uses
to receive the TV station then press
O
K
3
/
(or E).
satellite receiver users If the satellite broadcast is received
on your recorder’s auxiliary channel ‘L-2’, select ‘L-2’ for the
preset position.
return to normal screen Press m.
[1] a k
[MENU]: EXIT
GUIDE PROG SET
GUIDE PROG TV PROG
CH4
F
44
HR-S5955/5956EK-EN/p51-59 5/28/02, 11:53 AM52