Filter
Top Products
June 30, 2003 6:18 pm Page 3
— 3 —
Master Page: Right
Front Panel
Rear Panel
Remote control
On-screen display
If you press ENTER (OK
) on the remote control when “O.S.D.” is
set to “ON” (
੬
16), you can see the current recorder status on the
screen. To clear the on-screen display, press ENTER (OK
) again.
The indications are not recorded even if the recorder is in the
recording mode.
A Operation mode indicators
B Tape speed SP/LP/EP
C Colour system indicator (
੬
16)
D Tape direction
E Counter display
F Tape remaining time indicator
G Audio mode display (
੬
8)
H Tape position indicator (
੬
8)
I Type of broadcast (
੬
10)
J Current day/month/year
K Clock display
L Channel position number/Aux. indicator (L-1, F-1, S-1 or S-2)
M Cassette loaded mark
N S-VHS ET indicator
(S-VHS ET: ON / S-VHS: OFF)
Buttons, Connectors and Indicators
To access covered connectors, pull and open the connector
cover.
Cassette loading slot
Display panel
“Timer” indicator
Start Time
indicator
Channel/Clock/
Remain display
Mode display
(L-1, L-2, F-1,
S-1)
Infrared beam
receiving window
Instant REVIEW indicator
Counter
display
Pause 9
Play 4
Record 7
S-VIDEO/VIDEO/
AUDIO input
connectors
SP/LP/EP
Stop/Eject 0
REC LINK
Record indicator
S-VHS
indicator
1
Advanced
JOG dial
24H
EXPRESS #
#
Play indicator
Tape speed
SP/LP/EP
Stop Time indicator
S-VHS ET
(MONO)
Mains power cord
Lithium battery compartment
Buttons with a small dot on the left side of the name can also be
used to operate your TV (
੬
17).
CABLE/
SAT/DVD
TV
VCR
number keys
Record 7
Stop 8
Rewind Play 4
Fast Forward
Pause 9
HR-S6960AA_EN.fm Page 3 Monday, June 30, 2003 6:18 PM