Filter
Top Products
32
Minimizing
Picture
Degradation
While Editing
Turn on the TV and select the VIDEO channel (or AV mode).
Editing Mode Setting
Perform the following steps to set "EDIT" to "ON" before you
start editing (੬ pg. 33, 34, 36).
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS MODE SET SCREEN
2
Move the highlight bar
(pointer) to "MODE SET"
by pressing %fi, then press
OK or .
SELECT EDIT MODE
3
Move the highlight
(pointer) to "EDIT" by
pressing %fi, then press
OK or to select "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
REC LEVEL CTL
R.A. EDIT
[5
∞
] =
[MENU] : EXIT
%
MODE SET
AUTO TIMER OFF
O. S. D. ON
B. E. S. T. ON
AUTO SP=LP TIMER OFF
DIGITAL 3R ON
S-VHS AUTO
EDIT ON
NEXT PAGE
[5∞] =
[MENU] : EXIT
NOTE:
After you finish editing, be sure to set "EDIT" back to "OFF".
Advantages Of S-VHS
Video Recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
● From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
● From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
ADVANCED OPERATIONS (cont.)
%
123
456
7
89
0
2
4
1
3
OK
MENU