Filter
Top Products
11
12
45
3
6
8
0
7
9
2
2
q5
/
8
6
CH
MENU
OK
CH
OK
MENU
NUMBER
SHUTTLE PLUS
Manual
SELECT MODE
2
At the Override Auto Clock Set screen, place the
arrow next to “MANUAL CLOCK SET” by pressing
CH▲▼ or SHUTTLE PLUS
5
∞
, then press OK.
SET DATE, TIME AND D.S.T.
3
The Manual Clock Set
screen is displayed and the
first setting that can be set
begins flashing.
Press the appropriate
NUMBER keys to set the
date and time (if only 1
digit, press "0" first). Press
CH▲▼ or SHUTTLE PLUS
5
∞
to set AM/PM and D.S.T. (Daylight Saving Time) to
“ON” (automatic adjustment based on VCR’s clock) or
“OFF” (if D.S.T. doesn’t apply to you).
Press OK after AM/PM and D.S.T. settings. The next
setting that can be set begins flashing. When you’re
finished with this set-up procedure, press MENU to start
the clock.
NOTE:
CH
5
∞
and SHUTTLE PLUS
5
∞
can be used to perform
all operations. (In this case, press OK after each setting.)
MAKE CORRECTIONS
4
To change any of the settings, press OK or SHUTTLE
PLUS ™ £ until the item you want to change
blinks, then set as in step 3.
MANUAL CLOCK SET
DATE 1/ 1/96 MON
TIME – – : – – AM
D.S.T. ON
PRESS NUMBER KEY(0-9)
OR (
5
,∞), THEN (OK)
PRESS (MENU) TO END
SELECT MODE
2
At the Override Auto Clock Set screen, place the arrow
next to “AUTO CLOCK SET” by pressing CH
5
∞
or
SHUTTLE PLUS
5
∞
, then press MENU as many times
as necessary to return to the normal screen.
Auto
Auto need only be selected if Semi-Auto or Manual had
previously been selected.