JVC HR-VP436U VCR User Manual


 
17
SELECT CABLE BOX
OUTPUT CHANNEL
6
Your selection depends on
how your cable box is
connected to your VCR.
If your cable box is
connected to your VCR
using an RF connection . . .
. . . press CH
5
or
SHUTTLE PLUS
5
to
place the arrow next to the channel number representing
the cable box’s output (2–6).
If your cable box is connected to your VCR’s AUDIO/
VIDEO IN connectors . . .
. . . press CH
5
or SHUTTLE PLUS
5
to place the
arrow next to “ON LINE”.
RETURN TO VCR PLUS+
SET-UP SCREEN
7
Press MENU.
CABLE BOX OUTPUT
=OFF
ON CH2
ON CH3
ON CH4
ON CH5
ON CH6
ON LINE
PRESS (
5
,), TO SELECT
PRESS (MENU) TO END
TURN ON CABLE BOX
1
Select a channel other than channel 9 on your Cable
Box.
ACCESS CABLE BOX
BRAND SET SCREEN
2
At the VCR Plus+ Set-Up
screen, press CH
5
or
SHUTTLE PLUS
5
to
place the arrow next to
“CABLE BOX BRAND
SET”, then press OK.
ENTER CABLE BOX BRAND
3
Press the appropriate
NUMBER keys to enter the
Cable Box Code from the
CABLE BOX BRAND LIST
on page 18, then press
ENTER.
If the cable box’s
channel changes to 9,
setting is complete.
If there are more than one code number listed for
your brand of cable box, repeat step 3 until the cable
box’s channel changes to 9.
If you go through all listed code numbers and the
channel doesn’t change, try all other numbers
between 1 and 101.
VCR PLUS+ SET-UP
GUIDE CHANNEL SET
GUIDE GHANNEL MAP
CABLE BOX OUTPUT
=CABLE BOX BRAND SET
PRESS (
5
,), THEN (OK)
PRESS (MENU) TO END
12
45
3
6
8
0
7
9
2
2
q5
/
8
6
CH
MENU
OK
CH
MENU
SHUTTLE PLUS
OK
NUMBER
Set Cable Box Brand
CABLE BOX BRAND SET
1
SELECT BRAND NO. AND
PRESS (ENTER)
PRESS (MENU) TO END
CONTINUED ON NEXT PAGE.
ENTER