Filter
Top Products
Masterpage:Right-No-Heading
EN 27
Filename [XV3EX_07S-VHS.fm]
Page 27 August 22, 2003 12:20 pm
To Timer-Record Weekly Or Daily Serials:
— anytime during steps D through I, press WEEKLY (number
key “9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears
on the TV screen. Pressing the button again makes the
corresponding indication disappear.
NOTES:
● You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (
੬ “To cancel or change a programme”)
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.
Check, cancel and change programmes
A
Disengage the timer mode.
Press #, then press 1.
B
Access the Programme Check screen.
C
Access the Programme screen.
To cancel or change a programme
D
Cancel or change a programme.
Press & to cancel a programme. To change programme
settings, press the appropriate button: START +/–,
STOP +/–, DATE +/–, PR +/–, VPS/PDC (number key
“7”), DAILY (number key “8”), WEEKLY (number key
“9”) and/or p.
E
Return to the normal screen.
Press " as many times as necessary. If there are still
some programmes remaining, go on to step F.
F
Return to the timer mode.
Press #.
NOTE:
You can also check the programmes on the front display panel
even if the unit’s power is off (unless the unit is in the Power Save
mode
੬ pg. 64) or the unit is in the Timer mode; however, it is
not possible to cancel or change the programmes.
Satellite Receiver Users
To timer-record a satellite broadcast using Express Timer
Programming:
A Set “L-2 SELECT” to “A/V”. (
੬ pg. 64)
B Perform steps A – K. Enter “L-2” for the channel position
in step G.
C Set the satellite receiver to the appropriate channel before
the selected programme begins.
D Leave the satellite receiver’s power on.
Press ".
Press " again to check
more information. Each time
you press ", the next
programme’s information
appears.
XV3EX_01.book Page 27 Friday, August 22, 2003 12:21 PM