JVC HR-XV48EK DVD VCR Combo User Manual


 
Masterpage:Right-No-Heading
21
Filename [XV48EK_07S-VHS.fm]
Page 21 November 18, 2004 10:44 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press p. The current setting appears on the front
display panel or TV screen. Press p again to change
the setting while the tape speed is displayed on the TV
screen.
E
Start recording.
Press and hold 7 and press 4 on the remote control, or
press 7 on the unit.
If “O.S.D.” is set to “ON” ( pg. 53), “MARK” blinks on the
screen while an index code is being marked.
When “DIRECT REC” is set to “ON” (
pg. 53), if you press
any button just after pressing 7 on the unit (or 7 and 4 on
the remote control), the unit may not function properly.
F
Pause/Resume recording.
Press 9. Press 4 to resume recording.
You can select channel during the Record Pause mode.
G
Stop recording.
Press 8. Then press x on the VHS deck to remove the
cassette.
NOTE:
When the end of the tape is reached during recording, the unit
stops and “
” and “$” blink on the front display panel.
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch on the remote
control to the right.
Slide to the
right.
B.E.S.T. works at the beginning of both the first SP and the
first LP recording after inserting the cassette. (
pg. 23)
If “DIRECT REC” is set to “ON,” the programme that appears
on the TV screen will be recorded. (
pg. 53)
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording, or timer recording (
pg. 22, 26), the recording
will resume automatically when power is restored to the unit
unless the unit’s memory backup has expired.
Accidental erasure
prevention
To prevent accidental recording
on a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
Record safety tab
XV48EK_01.book Page 21 Thursday, November 18, 2004 10:45 PM