Filter
Top Products
9
Introduction
a ANT.IN
Connect the VHF/UHF/CATV antenna to this terminal.
b VCR IN LINE 1 (VIDEO/AUDIO (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/Monitor, VCR, Camcorder).
c DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
d COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
e AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV or other equipment with audio inputs.
f AC Power Cord
Plug into the power source.
g RF. OUT
Connect to a TV with RF coaxial inputs.
h COAXIAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (coaxial) audio equipment.
i S-VIDEO OUT (DVD OUT)
Connect to a S-Video Input on TV.
Rear Panel
Caution
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
abcde f
gh
Preparation
Depending on your TV and other equipment there are various ways you can connect the
player. Please refer to the manuals of your TV, VCR, stereo system or other devices as nec-
essary for additional connection information.
Notes:
• The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units
away from each other or turn off the unit after removing the disc.
•
Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.
• Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection
system.
i