Filter
Top Products
3
CAUTION
• Turn off all the epuipment including the TV
before connecting anything.
1
Connecting the aerial and VCR
• Aerial cable is not supplied. Use a good
quality 75-ohm coaxial cable.
• Read the manual that came with the VCR
before connecting.
If not connecting a VCR (see fig.A) :
Connect an aerial cable to the aerial socket
on this TV .
If connecting a VCR (see fig.B) :
1 Connect the aerial cable to the aerial
input socket on the VCR, and
connect the VCR and TV with
another aerial cable.
2 Connect the VCR's VIDEO OUT
(video output) jack and the TV's
VIDEO jack with a video cable.
To connect a VCR to the TV with an S-VIDEO
cable:
Connect the VCR's S-VIDEO OUT (S-VIDEO
output) connector and TV's S connector with an S-
VIDEO cable A, instead of connecting with a
video cable .
3 Connect the VCR's VIDEO OUT
(audio L/R output) jacks and the TV's
AUDIO jacks (L/MONO and R) with
an audio cable.
• If the VCR's audio output is in mono, connect
the VCR's AUDIO OUT (audio output) jack
and the TV's AUDIO L/MONO jack with an
audio cable.
• You can use the AV COMPU LINK function if
your VCR has an AV COMPU LINK terminal.
For details, see “Connecting AV COMPU LINK
Supported Devices” on page 38.
Setting up your TV
R
RL
L/MONO
AUDIO
AUDIO
L/MONOR AUDIO
C
R
C Y/VIDEO
B
VIDEO
VIDEO-2
VIDEO
OVER
S
VIDEO-3/
COMPONENT
VIDEO-1
OUTPUT
AV COMPULINK
Back of the TV
A
R
RL
L/MONO
AUDIO
AUDIO
L/MONOR AUDIO
C
R
C Y/VIDEO
B
VIDEO
VIDEO-2
VIDEO
OVER
S
VIDEO-3/
COMPONENT
VIDEO-1
OUTPUT
AV COMPULINK
Back of the TV
Fig.A
Fig.B
LCT1218-001A-H_p1-21 4/9/02, 6:51 PM3
Black