JVC JLE55SP4000 Flat Panel Television User Manual


 
TV Operation TV Channels
39
Changing the Channel
On the remote control, use the number keys to select a channel.
NOTE: When a channel is selected with the number keys, there will be
a short delay before the TV changes the channel. To change the
channel immediately, press OK after selecting a channel.
Browsing Channels
To increase or decrease the channel:
1 On the remote control, press button
2 At rear of TV, press the CHANNEL UP or CHANNEL DOWN buttons
Selecting Analog Channels
1~9
Press 1~9 as needed. For example: to select
channel 2, press 2, then press OK.
10~99
Press the 2 digits in order. For example: to select
channel 15, press 1, 5, and then press OK.
100~135
Press the 3 digits in order. For example: to select
channel 130, press 1, 3, 0, and then press OK.
Selecting Digital Channels
Press the first two or three digits, press the button, and then press
the remaining digit(s). For example: to select channel 15-1, press 1, 5, -
,.1, and then press OK.