Filter
Top Products
13
Quick Setup Connections
Connections
Please follow the flow chart below to determine which connection setup is right for you. Then,
refer to the appropriate diagrams to connect your television to other devices that you may
have. After you are finished connecting your devices, plug the power cord into the nearest
power outlet and turn on the TV.
A VCR is not necessary for operation of the television. If you follow these diagrams and the
television does not work properly, contact your local cable operator.
• To connect a DVD player, see Diagram #3. A DVD player is optional.
• If you have a satellite television system, please refer to the satellite TV manual.
Remove the terminal cover
There are connection terminals behind the cover on the rear
of the TV. Remove the cover before connecting an antenna
or other devices. The cover can be removed by removing
the hooks. When replacing the cover, place the bottom of the
cover against the TV and insert the hooks.
Note:
• Leave the terminal covers off if they do not fit properly. Do
not force to replace the covers. Doing so may damage the
connection cables and covers.
Step 3 - Connecting your devices
Diagram #2
Do you use a Cable TV Box?
Do you have a VCR? Do you have a VCR?
Diagram #1 Diagram #3 Diagram #1
Yes
No
Yes No Yes No
LCT1899-001B-A ENG 13 8/5/05, 11:41:42 AM