JVC XV-N412S DVD Player User Manual


 
23
XV-N412S/GNT0044-017A/English
J
P
E
G
d
i
s
c
p
l
a
y
b
a
c
k
NOTES
The player supports the baseline JPEG format.
The player does not support “packet writing (UDF file)” discs.
The player supports discs recorded with multiple sessions.
The player may not be able to read some discs, or may take a
long time to display a picture on the disc, due to disc
characteristics, recording conditions, or numbers of groups
(folders), etc.
Programmed and random playback functions do not work with
JPEG discs.
The screen saver function will be activated if the same picture is
displayed for more than 5 minutes except during slide show
playback.
The player only can play back files with the following file
extensions; “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any other
combination of upper case and lower case letters (such as
“.Jpg”).
If a JPEG file name includes any 2-byte character, the player
may not show the file name correctly.
If a picture has been saved at greater than 640 x 480 pixel
resolution, it may take some time to display the picture.
The player does not support pictures of more than 2400 pixels
in horizontal resolution. Make sure that the horizontal resolution
of the picture is 2400 pixels or less.
To zoom in the picture
1
While in pause mode, press ZOOM.
Pressing ZOOM causes the player to zoom in on the image.
Each time you press ZOOM, the mangnification increases
(1.8, 4, 8, 16, 32 and 64 times).
2
Press 5//2/3 to move the zoomed position.
Viewing pictures continuously (slide
show mode)
You can see files (still pictures) one after another automatically.
To start the slide show
Press 3 (SELECT).
The slide show starts from the beginning of the disc.
Each file (still picture) is displayed for approximately 3
seconds.
To stop slide show playback in the middle
Press 7 or MENU.
The TV screen returns to the JPEG CONTROL display.
Pressing 3 (SELECT) resumes slide show playback from the last
picture displayed.
To keep showing the current picture
Press 8 or ENTER.
Pressing 3 (SELECT) resumes the slide show playback.
To select the start point of the slide show
From the JPEG CONTROL display
1
Make sure that the black (cursor) bar is in the
left (group) column.
If it is in the right column, press 2 to move it to the left
column.
2
Press 5/to move the bar to a desired
group.
3
Press 4/¢ to select a desired file.
4
Press 3 (SELECT).
The slide show starts from the specified file.
Direct selection
1
During playback or while stopped, press
TITLE/GROUP.
2
Press the numeric buttons to specify a
desired group number.
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
3
Press the numeric buttons to specify a
desired file number.
The player starts slide show playback from the specified file.
If you do not specify a file, the player starts slide show
playback from the first file in the group.
Repeat function
In the slide show mode, you can repeat playback of JPEG files in
a group or on the disc.
1
While the JPEG CONTROL display is shown,
press REPEAT.
Pressing REPEAT switches the repeat mode.
When the repeat mode is turned on, the [ ] indicator lights
in the display window.
The selected repeat mode is shown on the JPEG CONTROL
display.
REPEAT ALL: All files on the disc are repeated.
REPEAT GROUP: All files in the current group are repeated.
No indication: The repeat mode is off.
2
Press 3 (SELECT) to start repeat playback.
To stop repeat playback
Press 7 or MENU.
The repeat mode remains active.
To quit repeat playback
Press 7 or MENU while the JPEG CONTROL display is shown,
and press REPEAT until the repeat mode indication goes off.
NOTE
You can change the repeat mode using ON SCREEN on the
remote control unit.
Press ON SCREEN, and the repeat mode selection window
appears on the TV screen. Then press
5/ to select the desired
repeat mode, and finally press ENTER to make the selected
repeat mode active.
XV-N412S(USUBUGUXUWA).book Page 23 Monday, April 5, 2004 7:40 PM