Filter
Top Products
14
XV-N512S/GNT0055-003A/English
B
a
s
i
c
p
l
a
y
b
a
c
k
Restarting playback after stopping
(Resuming playback)
The player can memorize the position on a disc where you
interrupt playback, and resume playback from that position later.
There are three resume modes; ON, OFF and DISC RESUME.
The mode is initially set to ON when you purchased the player.
• You can select the mode using the preference display (see
page 36).
When the resume mode is “ON”
When you press 7, the player stops playback and memorizes the
interrupted position. The TV screen shows [RESUME STOP] and
the display window shows [– – – – RESUME] (for DVD AUDIO/
DVD VIDEO discs) or [– – RESUME] (for SVCD/Video CD discs).
The memory of the interrupted position is not cleared if you turn
off the player.
When you turn off the player after setting the resume function,
simply press 3. The player is turned on, and playback starts from
the interrupted position. If you turn on the player by pressing
then press 3, playback starts from the beginning of the disc.
Note that the memory is cleared if you open the disc tray.
When the resume mode is “DISC RESUME”
When you press 7, the player stops playback and memorizes the
interrupted position. The TV screen shows [RESUME STOP] and
the display window shows [– – – – RESUME] (for DVD AUDIO/
DVD VIDEO discs) or [– – RESUME] (for SVCD/Video CD discs).
The memory of the interrupted position is not cleared if you open
the disc tray or turn off the player.
Hint
The player memorizes interrupted positions for the last 30 discs
played. Storing a new interrupted position will erase the
interrupted position stored for the first disc.
To clear the memory
Press 7 while the disc is stopped.
To resume playback
When the resume mode is “ON”
While the disc you interrupted playback is
still on the disc tray, press 3.
The player resumes playback from the position where
playback was interrupted. The TV screen and the display
window show [RESUME PLAY].
To play back from the beginning
Press 7 before pressing 3 to start playback.
When the resume mode is “DISC RESUME”
1 Press 0 to insert a disc for which the player
has stored an interrupted position.
The TV screen shows [RESUME STOP].
2 Press 3.
The TV screen and the display window show [RESUME
PLAY] and the player resumes playback from the position
where playback was interrupted.
To play back from the beginning
After inserting the disc, press 7 before pressing 3 to start
playback.
NOTES
• If you change the [RESUME] setting from [DISC RESUME] to
[OFF] or [ON], you cannot resume playback of a disc whose
“resuming” position is stored. However, when you again set
[RESUME] to [DISC RESUME], you will then be able to resume
playback of the disc.
• If you interrupt the playback of a disc for which an interrupted
position has already been stored, the memory will be updated
with the new interrupted position.
• For a double-sided DVD AUDIO/DVD VIDEO disc, the player
regards each side as a different disc. Therefore, to resume
playback of such a disc, the disc must be inserted with the
same side down.
• When the player memorizes an interrupted point for a disc, it
also memorizes Audio, Subtitle and Angle settings.
• The player may not resume playback exactly from the
interrupted point. In the case of an SVCD/Video CD disc with
PBC function, the player may resume playback from a point
slightly earlier or later than the point where playback was
interrupted.
73
3 (SELECT)
7
XV-N512S(B).book Page 14 Monday, May 10, 2004 10:45 AM