JVC KD-AVX2 DVD Player User Manual


 
59
ENGLISH
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms Remedies/Causes
General
Sound cannot be heard from the
speakers.
Adjust the volume to the optimum level.
Check the cords and connections.
Check the cords and connections.
The receiver does not work at all. Reset the receiver
(see page 2).
Remote controller does not work. Dual Zone is activated (see page 30).
While Dual Zone is activated, remote controller
only functions for operating the DVD/CD player.
“No Signal” appears on the monitor. Change the source.
Starts playback on the external component
connected to the VIDEO IN plug.
Check the cords and connections.
Signal input is too weak.
FM/AM
SSM automatic presetting does not
work.
Store stations manually.
Static noise while listening to the
radio.
Connect the antenna firmly.
Disc playback
Disc cannot be played back. Insert the disc correctly.
Recordable/Rewritable discs cannot
be played back.
Tracks on the Recordable/Rewritable
disc cannot be skipped.
Insert a finalized disc.
Finalize the
disc
with the component which you
used for recording.
Disc cannot be recognized. Eject the disc forcibly (see page 2).
“No Disc” appears on the monitor. Insert the disc correctly.
“Not Support” appears on the
monitor.
Use a file format the unit supports (see page 4).
“Disc Error” appears on the monitor. • Insert the disc correctly.
Insert a disc recorded and finalized.
“No Files” appears on the monitor. The disc does not have playable files. Insert a disc
containing playable files.
Sound and picture are sometimes
interrupted or distorted.
Stop playback while driving on rough roads.
Check the cords and connections.
No playback picture appears on the
monitor.
Parking brake wire is not connected properly. See
Installation/Connection Manual.
Troubleshooting
AVX2EN_book.indb 59AVX2EN_book.indb 59 06.1.25 6:20:39 PM06.1.25 6:20:39 PM