JVC KW-AVX820 DVD Player User Manual


 
20
ENGLISH
Menu item Selectable setting/item
Fader/Balance
Back
Fader/Balance
Reset
Fader 0
Balance 0
Fader : Adjust the front and rear speaker output balance.
F6 to R6; Initial 0
When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.
L6 to R6; Initial 0
Press [
5//2/3 ] or drag [ ] to adjust.
Volume Adjust *
1
Adjust and store the auto-adjustment volume level for each source, comparing
to the FM volume level. The volume level will automatically increase or decrease
when you change the source.
• <Fix> appears if an FM broadcast is selected as the source.
–12 to +12; Initial 00
Subwoofer Level Adjust the subwoofer output level.
–06 to +08; Initial 00
High Pass Filter
Through
On
: Select when the subwoofer is not connected.
: Select when the subwoofer is connected.
Crossover Select the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
Amplifier Gain *
2
You can change the maximum volume level of this unit.
Off
Low
High
: Deactivates the built-in amplifier.
: VOL 00 to 30 (Select this if the maximum power of the
speakers is less than 50 W.)
: VOL 00 to 50
Rear Speaker *
3
You can activate/deactivate the rear speakers.
On
Off
: Activate the rear speakers.
: Deactivate the rear speakers.
*
1
For “
DISC/USB
”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG
Audio and the others.
*
2
The volume level automatically changes to “VOL 30” if you change to <Low> with the volume level set higher than
“VOL 30.”
*
3
This setting takes effect only when Dual Zone is activated. ( 37)
Initial: Underlined
Sound
EN_KW-AVX820[J].indb 20EN_KW-AVX820[J].indb 20 09.1.12 1:17:44 PM09.1.12 1:17:44 PM