Filter
Top Products
63REFERENCES
ENGLISH
Symptom Remedy/Cause
MPEG1/MPEG2/MP3/
WMA/WAV/AAC
• Tracks are not played back as you have
intended them to play.
Playback order may differ from the one played back using
other players.
• Elapsed playing time is not correct. This sometimes occurs during playback. This is caused by
how the tracks are recorded.
• “Not Support” appears on the screen and
track skips.
The track is unplayable.
USB
• Noise is generated. The track played back is not a playable file format. Skip to
another file.
• Tracks cannot play back as you have
intended them to play.
Playback order may differ from the one played back using
other players.
• “Now Reading...” keeps flashing on the
screen.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy and folders.
• Turn off the power and on again.
• Correct characters are not displayed (e.g.
album name).
For available characters,
57.
• While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB device. Copy
tracks again, and try again.
Bluetooth
• Bluetooth device does not detect the
unit.
• Search from the Bluetooth device again.
• Reset the unit. When “Open...” appears on the monitor,
search from the Bluetooth device again.
• The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”
• Echo or noise occurs. Adjust the microphone unit position.
• Phone sound quality is poor. • Reduce the distance between the unit and the Bluetooth
cellular phone.
• Move the car to place where you can get a better signal
reception.
• The sound is interrupted or skipped
while using a Bluetooth audio player.
• Reduce the distance between the unit and the Bluetooth
audio player.
• Disconnect the device connected for Bluetooth phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the player
again.
• The connected audio player cannot be
controlled.
Check whether the connected audio player supports AVRCP
(Audio Video Remote Control Profile).
• The unit does not response when you
tried to copy the phone book to the unit.
You may have tried to copy the same entries (as stored) to
the unit.
Continued on the next page
EN_KW-AVX820[J].indb 63EN_KW-AVX820[J].indb 63 09.1.12 1:18:08 PM09.1.12 1:18:08 PM