Filter
Top Products
Masterpage:Right+
EN 77
Filename [MH50SEK_12Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 77Friday, 14 January 2005 16:44
Set Stations (A)
Set station names that are registered in your unit.
1 Perform steps 1 – 5 of A Manual Channel SetB (A pg. 76).
2 Press selection keys to select the channel you want to modify,
then press ENTER. The Confirmation screen appears.
3 Press selection keys to select AIDB, then press ENTER.
4 Move the arrow to the left ID selection column. Registered
station names (ID) (A pg. 89) appear as you press the
selection keys.
5 Press ENTER to select the desired ID, then press ENTER
again to select AOKB.
6 Press RETURN to return to the Manual Channel Set screen.
● Repeat steps 2 – 5 as necessary.
7 Press SET UP or RETURN to close the Confirmation screen.
Set Stations (B)
Set station names other than the ones registered in your unit.
1 Perform steps 1 – 5 of A Manual Channel SetB (A pg. 76).
2 Press selection keys to select the channel you want to modify,
then press ENTER. The Confirmation screen appears.
3 Press selection keys to select AIDB, then press ENTER.
4 Press selection keys to select the desired characters (A–Z, 0–
9, –, Z, +, & (space)), then press ENTER.
● Enter the remaining characters the same way (maximum of 4).
5 After entering all characters, press selection keys to select
AOKB, then press ENTER.
6 Press RETURN to return to the Manual Channel Set screen.
● Repeat steps 2 – 5 as necessary.
7 Press SET UP or RETURN to close the Confirmation screen.
NOTE:
The characters available for the station name (ID) are A–Z, 0–9, –,
Z, +, & (space) (maximum of 4).
Fine-Tuning Channels Already Stored
1 Perform steps 1 – 5 of AManual Channel SetB (A pg. 76).
2 Press selection keys to select the channel you want to fine-
tune, then press ENTER. The Confirmation screen appears.
3 Press selection keys to select AFINEB, then press ENTER.
4 Press selection keys until the picture appears in its best
quality, then press ENTER.
● Repeat steps 2 – 4 as necessary.
5 Press RETURN to return to the Manual Channel Set screen.
6 Press SET UP or RETURN to close the Confirmation screen.
MH50SEK_00.book Page 77 Friday, January 14, 2005 4:44 PM