Filter
Top Products
- 21 -
When recording on a T-V LINK
incompatible VCR:
1. Insert the videotape for recording into the
VCR and set the recording mode.
2. Set the VCR recording timer settings.
3. Make sure that the start and end time match
with the TV timer.
4. Set the VCR to record the signal from the
external input that the TV is connected to.
For details, see your VCR instruction
manual.
When you have finished the step 4, you have
set the timer.
When you are not watching TV, make sure the
TV is in stand by.
WARNING :
Do not turn off the main power. The timer func-
tion will not work with the main power switched
off.
The TV power lamp begins flashing before
the timer start time. When you are watching
TV at that time, a message appears on the
screen to inform you the timer is about to start.
When performing timer recording with a T-V
LINK compatible device, test the timer re-
cording before you record the programme.
There are some T-V LINK compatible re-
cording device that will not correctly receive
the Direct Rec command from the TV.
If the recording device does not operate
when the recording start time is reached, it
means VCR is not receiving the Direct Rec
command from the TV. In this case, follow
the instructions of When recording on a T-V
LINK incompatible VCR:.
While the timer is in operation:
You can turn the TV on or off (Stand by).
WARNING: Do not turn off the main power.
You can watch analogue terrestrial broad-
casting channels or the pictures via an Ext
terminal.
Please note that any programme informa-
tion that appears on the screen, such as
when making changes to the Digital terres-
trial broadcasting (DVB-T) channel picture,
will be superimposed over the picture in the
VCR recording.
When you press the following buttons (
,
AV, MENU,
(SUBTITLE), GUIDE, ,
BACK,
/ , number buttons) dur-
ing recording, a message appears asking
if you want to stop recording or not. Press
OK button to stop recording or BLUE but-
ton to continue recording.
Cancelling the timer setting
Display the TIMER MENU and press the
/ buttons to choose which timer setting
to cancel. Press the
/ buttons so
that Inactive appears in the Mode column.
Reactivating the cancelled timer
setting
Display the TIMER MENU and press the
/ buttons to choose which timer
setting to reactivate. Press the
/
buttons so that Active appears in the Mode
column.
Configuration
Set the basic setting when watching Digital
terrestrial broadcasting (DVB-T).
Choose configuration and press the OK but-
ton.
CONFIGURATION appears.
When the BACK button is pressed, the previ-
ous screen is returned to. When MENU but-
ton is pressed, the menu disappears.
When the (Information) button is
pressed, the help screen appears. When it
is pressed again, the previous screen is re-
turned to.
01-ENG-20710-17MB16P-C1897S UK-(LT-20DJ5SSP)-(TVAVOK)-IDTV-10041702-50087315.p65 07.06.2006, 15:5221