Filter
Top Products
- 28 -
Setting Bright-2
Using
or button select Bright-2.
Press
button to increase the back light.
Press button to decrease the back light.
Setting Colour Temp.
Using
or button select Colour
Temp.
Press
or button to select Warm,
Cool or Normal.
Setting Noise Reduction
Using
or button select Noise Re-
duction.
Press or button to select Noise Re-
duction level Off or Minimum or Me-
dium or Maximum.
Note 1:
At low signal level, the changings on the Noise Reduction
function are not effective when there is menu on the screen.
If the menu is removed, the effect of this function is seen. At
normal broadcasting, Noise Reduction changings are effec-
tive at once.
Note 2:
At moving pictures, while Noise Reduction is at maximum
level, some picture distortions may occur. If Noise Reduc-
tion is set to medium or minimum, the picture will improve.
Setting Hue
During Playback NTSC system, this will ap-
pear in AV mode only when NTSC video source
is applied. Otherwise, HUE option is invisible
in Picture menu in TV mode :
Using
or button select Hue.
Press
button to increase hue level.
Press button to decrease hue level.
Center value is indicated with one arrow.
Reset
Press BLUE button to reset the picture modes
to factory default settings.
To Store the Settings
In the Picture Menu, all settings are stored
automatically.
Sound Menu
As you enter the main menu, sound will be the
second item. In the main menu, select Sound
using
or button, then enter the sound
menu by pressing
/ or OK button.
Setting Volume
As you enter the sound menu, Volume will be
the first selected option.
Press
button to increase volume.
Press button to decrease volume.
Or you can directly change the volume set-
tings using
+ (to increase) or - (to
decrease) button.
Setting Bass Level
Using
or button select Bass
Level.
Press
button to increase bass level.
Press button to decrease bass level.
Setting Treble Level
Using
or button select Treble
01-ENG-20710-17MB16P-C1897S UK-(LT-20DJ5SSP)-(TVAVOK)-IDTV-10041702-50087315.p65 07.06.2006, 15:5228