Filter
Top Products
Remote control buttons and functions
19
ENGLISH
LT-32/26C50BJ / LCT1792-001A-U / English
Adjusting the visible area of the
picture
If subtitles or the top (or bottom) of the
picture are cut off, you can adjust the visible
area of the picture manually.
1 Press the c button
The ZOOM menu appears.
2 Press the a button to display the
ZOOM mode indicator
The indicator appears.
3 While it is displayed, press the 6
buttons to change the position of
the picture
• You cannot adjust the visible area in
REGULAR or FULL mode.
The visible area adjustment is saved even
after the TV channel is changed.
However, it is cancelled if:
• the power is turned off/on
• the ZOOM mode is changed
• the X (Multi) button, f (Freeze) button,
or g (Text) button is pressed
• the TV is switched between TV mode and
EXT mode.
3D SOUND function
You can enjoy sounds with a wider
ambience.
• This function does not work for the sound
from headphones.
Press the i (3D SOUND) button to
select one of these 3D SOUND modes
HIGH/LOW:
When you listen to stereo sound, please
select HIGH or LOW mode.
You can enjoy sound similar to the
experience at the theatre.
When you combine the functions of A.H.B.
and BBE, you can enjoy more powerful
sound.
• When you set the 3D SOUND function to
HIGH mode, there may be slight volume
distortion. If that occurs, please switch to
LOW mode. The effect of 3D SOUND
functions will be less noticeable, but the
volume distortion will be corrected.
MONO:
Select the MONO mode, when you listen to
the mono sound.
You can enjoy a sound similar to stereo
sound.
OFF:
The 3D SOUND function switches off.
• You can choose the 3D SOUND mode
with the “SOUND menu” (see page 33).
Return to TV channel instantly
You can return to a TV channel instantly.
Press the b button
The TV returns to the TV mode and a TV
channel appears.
16 : 9 ZOOM
D0010-EN
LT-32&26C50BJ_Eng.book Page 19 Thursday, December 2, 2004 11:15 AM