JVC LT-32c50bj Flat Panel Television User Manual


 
32
PICTURE menu
LT-32/26C50BJ / LCT1792-001A-U / English
COLOUR SYSTEM
The colour system is chosen automatically.
However, if the picture is not clear or no
colour appears, choose the colour system
manually.
1 Choose COLOUR SYSTEM. Then
press the a or 3 button
The sub-menu of the COLOUR SYSTEM
function appears.
2 Press the 5 buttons to choose
MAIN or SUB
MAIN:
You can change the colour system of the
main-picture.
SUB:
You can change the colour system of the
sub-picture.
Choose MAIN when a sub-picture is
not displayed.
3 Press the 6 buttons to choose
the appropriate colour system.
Then press the a button
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system
from the input signal. You can only use
this when you are viewing a picture from
programme number PR 0 (AV), or an
EXT terminal.
The AUTO function may not function
properly if you have poor signal quality.
If the picture is abnormal in the AUTO
function, choose another colour system
manually.
When in the Programme numbers PR 0
(AV) to PR 99, you cannot choose NTSC
3.58 or NTSC 4.43.
SECAM can be chosen when the
COUNTRY setting is IRELAND.
COLOUR SYSTEM cannot be chosen
when you are watching the EXT-4 picture
or PC picture.
4:3 AUTO ASPECT
You can choose one of three ZOOM modes,
REGULAR, PANORAMIC or 14:9 ZOOM,
as the ZOOM mode for the normal picture
(4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then
press the a button
2 Press the 6 buttons to choose a
ZOOM mode
D0016-EN
>> COLOUR SYSTEM
MAIN
SUB
PAL
AUTO
OK
D0017-EN
>> 4:3 AUTO ASPECT
OK
PANORAMIC
REGULAR
14:9 ZOOM
LT-32&26C50BJ_Eng.book Page 32 Thursday, December 2, 2004 11:15 AM