Filter
Top Products
PICTURE FEATURES
20
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
COLOUR SYSTEM
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
1 Choose COLOUR SYSTEM. Then press the a
aa
a
button
The sub-menu of the COLOUR SYSTEM function
appears.
2 Press the 5
55
5 buttons to choose MAIN or SUB
MAIN:
You can change the colour system of the main-picture.
SUB:
You can change the colour system of the sub-picture.
• Choose MAIN when a sub-picture is not displayed.
3 Press the 6
66
6 buttons to choose the
appropriate colour system. Then press the a
aa
a
button
AUTO:
This function detects a colour system from the input
signal. You can only use this when you are viewing a
picture from programme number PR 0 (AV), or a
VIDEO terminal.
Refer to the following table for the various international
colour systems.
Colour system
• The AUTO function may not function properly if you
have poor signal quality. If the picture is abnormal in the
AUTO function, choose another colour system
manually.
• When in the Programme numbers PR 0 (AV) to PR 99,
you cannot choose NTSC 3.58 or NTSC 4.43.
PULL DOWN
The PULL DOWN function displays a cinema film picture
more smoothly and naturally on the screen.
AUTO:
The television automatically recognizes the type of signal
and turns the function on and off.
ON:
This function is turned on.
OFF:
This function is turned off.
• The motion may appear unnatural when viewing images
with the NTSC colour system. When the PULL DOWN
function is set to AUTO or ON, the motion may appear
unnatural when viewing images with the NTSC colour
system.
• You cannot select this function in the twin pictures mode
or the picture in picture mode.
4:3 AUTO ASPECT
You can choose one of three ZOOM modes, REGULAR,
PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the
normal picture (4:3 aspect ratio).
1 Choose 4:3 AUTO ASPECT then press the a
aa
a
button
2Press the 6
66
6 buttons to choose a ZOOM mode.
Then press the a
aa
a button
COLOUR MANAGEMENT
This TV supports the COLOUR MANAGEMENT function
to ensure dull colours are compensated to produce natural
hues.
The COLOUR MANAGEMENT function is on by default.
ON:
COLOUR MANAGEMENT function is turned on.
OFF:
COLOUR MANAGEMENT function is turned off.
• Set this function to ON under normal conditions.
PIP
You can choose one of four positions for the sub-picture.
1Press the 6
66
6 buttons to choose PIP. Then
press the a
aa
a button
The PIP menu appears.
2Press the 5
55
5 buttons to choose the position.
Then press the a
aa
a button
Area Country or region System
Asia,
Middle
East
Bahrain, Kuwait, Oman, Qatar, United
Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore,
Thailand, India, etc.
PAL
China, Vietnam, etc PAL
Hong Kong, etc PAL
Islamic Republic of Iran, Lebanon,
Saudi Arabia, etc.
SECAM
Philippines, Taiwan, Myanmar, etc NTSC
Europe
Russia, etc SECAM
Czech Republic, Poland, etc PAL
Germany, Holland, Belgium, etc PAL
UK, etc PAL
Oceania Australia, New Zealand, etc PAL
Africa
Republic of South Africa, etc PAL
Nigeria, etc PAL
Egypt, Morocco, etc SECAM
TV OK
BACK
D0016-EN
COLOUR SYSTEM
MAIN SUB
PAL
AUTO
TV OK
BACK
D0017-EN
4:3 AUTO ASPECT
PANORAMIC
REGULAR
14:9 ZOOM
D0061-EN
TV OK
BACK
PIP
LT-Z32&26S2_Eng.book Page 20 Thursday, December 18, 2003 10:11 AM