Filter
Top Products
5
Setting up your TV
LT-Z32/26S2 (ASIA) / LCT1597-001A / English
ENGLISH
Putting the batteries into the Remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making sure the + and - polarities are correct.
• Follow the warnings printed on the batteries.
• Battery life is about six months to one year, depending on your frequency of use.
• The batteries we supply are only for setting up and testing your TV, please replace them as soon as necessary.
• If the remote control does not work properly, replace the batteries.
Remove the terminal covers
There are connection terminals behind the covers on the left and right of the rear of the TV. Remove these two covers before
connecting an antenna or VCR.
• Leave the covers off if they do not fit properly. Do not force to replace the covers. Doing so may cause damages of the
connection cables and the covers.
For LT-Z32S2
Remove the covers by removing the hooks.
When replacing the covers, place the side of the covers against the
TV and insert the hooks.
For LT-Z26S2
The covers can be removed by removing the hook at the bottom
and then pulling out while lifting slightly. To replace the covers,
first connect the hook at the top of the cover to the TV and then
insert the hook at the bottom.
• Leave these covers off when mounting the TV on a wall.
LT-Z32&26S2_Eng.book Page 5 Thursday, December 18, 2003 10:11 AM