Filter
Top Products
Filename [VS30U_2-EN.fm]
Masterpage:Left
46
EN
Page 46 January 31, 2002 3:37 pm
TIMER RECORDING (cont.)
Express Timer
Programing
If you do not know the PlusCode number for the program
you wish to record, use the following procedure to set
your VCR to timer-record the program.
A
Turn on the VCR.
Press
POWER
.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
C
Select the deck.
Press
S-VHS
or
DV
.
D
Access the PlusCode screen.
Press
PROG
.
E
Access the Program screen.
F
Enter the program start time.
G
Enter the program stop time.
Press
STOP+/–
to enter the time you want recording to
stop.
● Press and hold
STOP+/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
Before performing Express Timer Programing:
● Make sure that the VCR’s built-in clock is set properly.
● Turn on the TV and select the AV mode.
123
456
7
89
0
2
4
1
3
T W
DV S-VHS
Press
START+/–
. (If you’re
just starting out and you have
selected the VHS deck, “VHS
PROGRAM 1” appears.)
Press
START+/–
to enter the
time you want recording to
start.
● Press and hold
START+/–
to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
VS30U_2-EN.fm Page 46 Thursday, January 31, 2002 3:38 PM