Filter
Top Products
Masterpage:Right
EN
77
Filename [VS30U_4-EN.fm]
Page 77 January 31, 2002 3:45 pm
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are
often easily corrected, and this can save you the trouble of sending your VCR off for repair.
POWER
TAPE TRANSPORT
PLAYBACK
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. No power is supplied to the VCR.
●
The AC power cord is disconnected. Connect the AC power cord.
2. The clock is functioning properly, but
the VCR cannot be powered.
●
“
#
” is displayed on the front display
panel with “AUTO TIMER” set to “OFF”.
Press the
TIMER
button to turn the “
#
”
indicator off.
3. The Remote won’t function.
●
The batteries are discharged. Replace the dead batteries with new ones.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. The tape does not run during
recording.
●
“
i
” is displayed on the front display
panel.
Press
PLAY
(
4
) to turn the “
i
” indicator
off.
2. The tape will not rewind or fast-
forward.
●
The tape is already fully rewound or
fast-forwarded.
Check the cassette.
SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION
1. The playback picture does not appear
while the tape is running.
●
The TV receiver is not set to the AV
mode.
Set the TV to its AV mode.
2. Noise appears during visual search.
●
This is normal.
3. Noise appears during normal
playback. (VHS deck only)
●
The automatic tracking mode is
engaged.
Try manual tracking. (
੬
pg. 31)
4. The playback picture is blurred or
interrupted while TV broadcasts are
clear or “USE CLEANING CASSETTE”
message appears on the screen.
●
The video heads may be dirty.
For the VHS deck
Use a dry cleaning cassette TCL-2, or
consult your JVC dealer.
For the DV deck
Use a dry cleaning cassette M-DV12CL, or
consult your JVC dealer.
5. Breaks are noticeable in Hi-Fi
soundtrack. (VHS deck only)
●
The automatic tracking mode is
engaged.
Try manual tracking. (
੬
pg. 31)
VS30U_4-EN.fm Page 77 Thursday, January 31, 2002 3:45 PM