Filter
Top Products
26
Playing a T
Playing a T
ape
ape
1. Press VCR to control the VCR deck.
2. Insert a pre-recorded video cassette.
• If the unit is powered off, it will power on
automatically when the tape is loaded.
• If the Timer indicator lights on the front panel
display window, press STANDBY/ON once.
3. Press PLAY (N) to start playback.
• If a tape without a safety tab is inserted the
unit starts playback automatically.
4. Press STOP (x) to stop playback.
• If the tape reaches the end before you press
STOP (x) the Recorder automatically stops,
rewinds and ejects the tape.
Notes:
• S-VHS Quasi Playback (SQPB)
- This Recorder can play back S-VHS recorded
tapes.
- SQPB is an abbreviation for S-VHS Quasi
Playback.
• If you insert an unformatted disc during the VCR
playback, the unit will stop the VCR playback and
change to DVD mode automatically, then the disc
initialize menu will appears.
Playing a DVD or V
Playing a DVD or V
ideo CD
ideo CD
1. Press DVD to control the DVD deck.
2. Press OPEN/CLOSE (Z) to open the disc tray.
Load your chosen disc in the tray, with the
playback side down.
3. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press PLAY (N)orStarts playback
using HOME menu.
4. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. “
X
x” appears on the screen briefly.
Press PLAY (N) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc (“x” appears on the screen.), the
unit will clear the stopped point.
5. Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press STANDBY/ON (1/`), the disc tray closes
automatically and unit turns off.
Note:
• After loading a disc, the black screen may
appears for a moment. It is not a malfunction.
Playback