Filter
Top Products
5
<Before Attaching Plasma Display>
2. Push in the heads of the left and right Frame Removal Lever Screws a and lift up section b to remove the
Frame q from the Wall Mounting Unit w.
The Wall Mounting Unit is sold with Frame q and Wall Mounting Unit w fixed together. The following steps should
be performed before attaching the plasma display.
1. Take the left and right Frame Fastening Screw Components and remove the Fastening Screw, Spacer Ring, Flat
Washer, and Spring Washer.
These Frame Fastening Screws, Spacer Rings, Flat Washers, and Spring Washers will be used when attaching
the plasma display to the Wall Mounting Unit. Be sure to keep them in a safe place.
Frame Fastening Screw
Spring Washer
Flat Washer
Spacer Ring
q Frame
w Wall Mounting Unit
q Frame
w
Wall Mounting Unit
Frame Removal
Lever Screws