Filter
Top Products
E-14
OPERATION (continued)
o SHUTTER MODE (ELECTRONIC SHUTTER)
SETTING
● Changes the camera’s shutter mode.
Selectable modes
The following 5 MODE can be selected:
NORMAL, STEP, EEI, V.SCAN, SLOW
1. Press SHUTTER button I.
● ASHUTTERB and the current shutter mode will
be indicated on the LCD screen.
NOTE:
if AGAIN MODE ALC + EEI WORKINGB is
indicated on the LCD panel, set the gain mode to
a mode other than AALC + EEIB, then start from
the beginning again.
● When gain mode is set to AALC + EEIB, the
shutter mode will be fixed at AEEIB, and you
cannot set to any other shutter mode.
If ARANDOM TRIGGER WORKINGB is displayed
in the LCD, set the random trigger mode to OFF,
then reset as necessary.
● Once the random trigger mode is set to ON, the
shutter mode is fixed to the specified speed. You
cannot select other settings for the shutter mode.
2. Select the shutter mode using FUNC2 button
D.
● Each time is pressed, the mode changes
from NORMAL N STEP N EEI N V.SCAN N
SLOW N NORMAL ...; pressing changes
the modes in reverse order.
● In the STEP mode, the current shutter speed is
indicated to the left.
● If a shutter mode other than NORMAL is set,
the SHUTTER LED lights. (The LED doesn’t
light if the V.SCAN shutter mode is set to A1/
60.0 (1/50.0 for E version model)B.)
● When shutter mode is set to AEEIB, setting of
iris mode using ALC IRIS SET is possible.
(A pg. 18, AREMOTE CONTROLLER
OPERATION MODE SETTINGSB)
3. In the STEP mode, select the shutter speed
using FUNC1 button C.
● Each time is pressed, the mode changes
from 1/100(1/120)*N 1/250 N 1/500 N 1/1000
N 1/2000 N1/4000 N1/10000 N ...; pressing
changes the modes in reverse order.
● The shutter speed that is not compatible with
the camera will not be displayed.
o V.SCAN (VARIABLE SCAN) SETTING
● Varies the camera’s shutter speed in sequence
so that it can match the scanning speed of a
computer monitor display, etc.
1. Select AV.SCANB using FUNC2 button D.
● The current V.SCAN speed be indicated on the
LCD screen.
FUNC1
W.BAL
MENU
FILE
ENTER
/SET
SHUTTER
FUNC2
GAIN
CC
I
D
SHUTTER
Press SHUTTER button.
SHUTTER
NORMAL
GAIN MODE
ALC+EEI WORKING
RANDOM TRIGGER
WORKING
FUNC2
Select shutter mode.
SHUTTER
1/250 STEP
FUNC1 FUNC2
*1/100 : U-version model
1/120 : E-version model
Select shutter speed.
SHUTTER
1/60.0 V .SCAN
V.SCAN speed
FUNC2
Set to AV. SCA NB.
RM-LP55_U_E.book Page 14 Monday, July 25, 2005 2:57 PM