Filter
Top Products
ITALIANOESPAÑOL
FRANÇAIS
DEUTSCH ENGLISH
E-9
o TITLE DISPLAY (ON/OFF)
● Set to ON if you want a title display on the
monitor screen. Set to OFF If you don’t.
1. Press MENU button B to select Menu item
A7: TITLEB.
2. Press FUNC2 button D to set the mode to ON
or OFF.
o TITLE EDIT
Refer to a monitor TV when editing the title.
● To register or correct the title that will be
displayed on the monitor TV.
1. Press MENU button B to select Menu item
A8: TITLE SETB.
2. Press FUNC2 button D to set the mode to
AEDITB.
3. Press ENTER/SET button E.
(1) The LCD display changes as shown in the
figure below.
(2) The monitor screen shows two windows;
the character list window and the title
window. The title window displays the
current title stored in the camera.
(3) The first letter in the title will be blinking
together with the corresponding letter in the
character list window. (A_B blinks in the
blank area.)
4. Press FUNC1 button C to move the cursor in
the title window to select the character to be
replaced.
● Press to move the cursor right and press
to move it left. The blinking character in the
character list window changes to correspond
with the cursor-selected letter in the title
window .
5. Press FUNC2 button D to move the cursor in
the character list window to select the
character to input.
● Press to move the cursor right and press
to move it left. The blinking character in the title
window changes to correspond with the cursor-
selected letter in the character list window.
6. To set the character, press FUNC1 button C.
The cursor moves and the character in the title
window is replaced by the character selected
from the character list.
7. Repeat steps 4. to 6. as necessary.
8. Press ENTER/SET button E to end title
setting. The title is stored in the camera’s
memory.
● The LCD panel will show A8: TITLE SETB.
● ATITLE EDITB will disappear from the monitor
screen; if the title display function is ON, the
title will appear on the monitor screen. If the
title display function is OFF, no title will appear.
NOTE:
The registered title is not stored in the remote
control unit. If you connect a different camera,
you’ll have to set the title again.
7 : TITLE
OFF
Mode indication
Sets ON/OFF.
FUNC2
8 : TITLE SET
EDIT
FUNC2
Selects AEDITB.
Blinking
TITLE EDIT
CURSOR CHAR
TITLE EDIT
ABCDEFGHIJKLMNOPQ
RSTUVWXYZ012345678
9. , : ?<>!'~+-/%&
JVC COLOR CAMERA
KY-F55 TITLE SET
SAMPLE DISPLAY
FUNC1
Character list
window (Characters
available for title
setting)
Title window
(Preset Title)
Monitor screen
Moves the cursor
in the title window.
Moves the cursor in the
character list window
FUNC2
RM-LP55_U_E.book Page 9 Monday, July 25, 2005 2:57 PM